//Google Analytics

Follow us on...

FacebookTwitterYoutube

Araldite® on Twitter

Follow goaraldite on Twitter

Araldite® Rapid 2 x 100ml tube

Araldite® Rapid 2 x 100ml tube

A strong, long lasting solvent free adhesive which is water resistant and can be painted or sanded.

Important
Bonds metal, wood, masonry, ceramics, glass, dry concrete, chipboard, leather, cardboard, fabric, rubber and most plastics (except polyethylene, polypropylene, Teflon®).
Make sure surfaces are clean and free from dust, corrosion, dirt and grease. For optimum bonding, slightly roughen surfaces with sandpaper and degrease metals with a suitable solvent. During assembly apply light pressure to the joint until set (clamps, tape around 20 minutes. Allow 3 hours to attain full strength before rough handling or sanding.

 

 

How to apply
Araldite® Rapid is a strong 2-component epoxy with fast setting. Parts repositionable for 4 minutes. Oil, chemical and impact resistant. High temperature resistance (-30°C to 65°C). Do not use to repair or bond items that will contact food or drink. Not recommended for bonding rearview mirrors to car windscreens.

Storage
Should be stored in a dry place at room temperature in the original tubes.

New
Environmentally friendly product formulation.

 

  Download this page as a pdf file

 

Whatever the job, we have a glue for you. Use our 'glue finder' to select the best product for your application.

 

Banner
FrancaisEnglish